In case you ordered your Galaxy Note 3 Duos SM-N9002 shortly after it was launched in October 2013, here’s what you can do with it next: update it to Android 4.3 via ZNUDMK1 official firmware. You’ll have our guide to help you with this important procedure.
The tool that’s present in today’s post was launched recently, just last month. You should use it on the Galaxy Note 3 Duos N9002, the Chinese version. If your smartphone is not this one, use another tutorial to update your phone; this one will only brick your device along with everything important in it.
The new Jelly Bean ZNUDMK1 prides itself on the fact that it doesn’t bring bugs on your device; instead, it helps it perform at the highest level possible. If your phone is running a custom ROM, there’s nothing stopping you from updating it to the new firmware. That is, if you don’t mind this happening in case the handset is rooted: the system partition being deleted and the root access being revoked. Should you own a rooted version, though, the important data on it, as well as the internal / external SD cards, will not go away / be erased.
The new tool comes with an activated KIES. This basically translates into the fact that you won’t be given the possibility to use
KIES software if you want to upgrade your handset with it. But you can always use an OTA with the Softare Update button under Settings menu method or today’s guide.
If you’ve acknowledged the pros and cons of updating your smartphone, you’re ready to take a look at these pre-requisites:
- disable the security software present on the Galaxy Note 3 Duos SM-N9002 and the laptop you’re using;
- keep close the USB cord that comes with your smartphone;
- use only a laptop or comp that comes pre-installed with Windows;
- check the charge level of your phone and, if the battery is running low, charge it;
- create backups (a normal and a NANDroid one, too, generated with this guide);
- install, on your PC or notebook, USB drivers that are available for your smartphone;
- turn USB Debugging on;
- download Odin tool from this location and the on your laptop or computer.
- When you’re finished with these requirements, we ask that you do the following: save the two packages on the same device, unzip them both and then boot your SM-N9002 in Download Mode.
- The booting should be performed via these instructions: press and simultaneously hold Volume Down, Power and Home. Then we recommend you to go to where you saved the Odin and open it as Admin on the PC/laptop.
- After that use the phone’s USB cable to create a connection between it and the other device. After a connection is finally established, you should see an “Added!!” and an ID:COM colored in yellow. But should you not come across these two signs, you need to do this: choose a different USB port to make use of or flash the USB drivers again.
- Now follow our lead and perform these tasks: click on PDA, opt for a file that has CODE in its name, click on Phone, choose a file with a MODEM in the name, tap CSC, choose a file with CSC in the name, click on PIT and go for a file which should have .pit as its extension in the name.
- Now consider these instructions: after you are done checking the boxes called Re-partition, F. Reset Time and Auto Reboot, you need to begin the firmware’s installation by tapping “Start“. Now have patience until the firmware is flashed.
- When it is, your smartphone will reboot and then deliver a message saying “Pass“. The second you see the message from earlier, you should disconnect the handset from the comp or laptop to complete the tutorial.
- [sc name=”banner-jos”]When the guide is over, you’d better run over to “Settings“, wait for “About Phone” to pop up and tap the latter when you see it. That’s the place where the Android 4.3 ZNUDMK1 official firmware is waiting for you to try out on your Galaxy Note 3 Duos N9002.
If it doesn’t do anything for you in terms of performance, looks and so on, you can opt to restore the device to its previous ROM; this requires you to use the NANDroid backup file to revoke the upgrade.
Leave a comment in the field below if you want to ask us something or the guide doesn’t function for you.
My name is Mark, I am a new chief editor of this blog, freelance writer, entrepreneur, and simply a technology lover. Currently a proud owner of a Google Pixel 4a.